Vaydor G35

The Vaydor G35 is a kit car that is designed to be built onto a 2003-2007 Infiniti G35 coupe donor car. It was originally built by Vaydor Bodykits LLC, which is based out of Pinellas Park, Florida.The Vaydor first appeared in the 2013 SEMA auto show.

One of the reasons the Vaydor G35 became so popular this year was because of its recent appearance in the movie Suicide Squad. The Joker’s supercar looking ride looks like a Lamborghini Aventador and a Bugatti Chiron made love and gave birth to the Lambogatti. Which then got all romantic with a catfish and gave birth to this thing, the Vaydor G35.

The G35, as in the Infiniti G35 Coupe from 2003-2007. This is a “Re-Body” as Matt McEntegart, owner of Vaydor Exotics, coins it. The Vaydor G35 takes an existing G35 and strips all of the cosmetics off the car. The Bumpers, the trim, the glass, and the doors have all been disintegrated, leaving behind the car’s skeletal remains, drivetrain, wiring, and miscellaneous systems like the AC.

It was Designed by an Average Guy with No Money

My favorite part about the Vaydor body kit origin is that it is the perfect underdog story. The kit was designed by Matt McEntegart, a normal guy that loves cars and always wished he could own a supercar. Unfortunately, he didn’t have the money to buy one, so he built it himself.

He’s even said that he didn’t go to design school, he just learned as he went. The goal for the Vaydor G35 was to build a car that looked just like a factory production supercar that you could build in your garage.


Once you’ve stripped the car it only takes a non-supercar $11,000 to turn the bare G35 into the Vaydor G35. The fiberglass kit includes:

1 Main Rear Body Shell

1 Front Clip (Fenders and Bumper)

2 Door Outers, 2 Door Inners, 2 Inside Door Braces

1 Hood Skin, 1 Hood Inner

1 Roof Wing Cover, 1 Roof Wing Inner

1 Rear Hood Skin, 1 Rear Hood Inner

1 Gas Filler Bucket

2 Side Roof Rails

2 Lower Rocker Splitter

2 After-Door Vents

2 Fender Vents

1 Cowl/ Lower Windshield Cover

3 Rear Exit Vents (Tail Light Area)

1 Rear Floating Wing

1 Front Lower Splitter

2 Rear Fender Wells

1 Front Core Support

2-Quarter Glasses

1-Rear Glass

1-Center Tail Light (Parts listed above are for the hard top. Spider parts list will vary slightly (Removable Hard Top, etc.))

1 Full Cage

2 DOT Headlights

Front Core Support

2-Quarter Glasses

1-Rear Glass

1-Center Tail Light (Parts listed above are for the hard top. Spider parts list will vary slightly (Removable Hard Top, etc.))

1 Full Cage

2 DOT Headlights



You’d then need another $3,000 for the interior materials which consists of:

2- Seats and Seat Backs

2-Door Panels

1- Dash Board

1- Console Center

1- Center Console Rear

1- Gauge Cluster Top

2- A-Pillars

2-Quarter Panels-HT


1-Dash Center Trim

1-Center Console Trim

If installed properly the results are amazing, probably as amazing as the story of the man who built this kit. As seen in the video, Matt took some big risks while tirelessly working on his passion, proving that success happens when you put in a lot of hard work and a little bit of luck comes your way.


Naturally aspirated 3.5L V6 – 280hp

Suspension / Brakes
The suspension set up utilizes a full adjustable coil over kit (optional active suspension or air ride) with heavy duty sway bars. Big Brake Kits from Brembo, Wilwood, and Stop Tech are available selections

Rims / Tires
Pirelli P-zero tires cover 22×9.5 (front) and 22×13 (rear) Amani Forged rims.

Turnkey, built by SuperCraft Cars with ang LS3 engine

Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

This site uses Akismet to reduce spam. Learn how your comment data is processed.